:: VapaNet LE ::

Electrode Boiler Humidifiers
The VapaNet control system is designed with user interaction in mind. The LED display on the door front incorporates simple and clear signals. The indicators will show: Unit off, On-line, Standby, Drain fault, Feed fault, Over current, Service interval, Service routines operational or completed. It is easy for the user or engineer to gain instant information about the performance of the Humidifier.

This is a LON Mark device and will interact with any compatible open architecture Building Management System.

Commissioning could not be easier. The Humidifier is factory set to perform at optimum levels. After all the normal checks, the commissioning engineer can use jumpers to set the input control signal and the supply water quality.

LE Comfort Control Model
Ideally suited where there is a need to maintain humidification within given tolerances, but where a brief delay in response, as the system adjusts to changing humidification demands, is acceptable. The VapaNet Water Level range is designed to meet these requirements, incorporating an intelligent combination of Feeding, Boiling and Draining to minimise wastage of water and energy. Water Level control technology gives a performance turndown of between 20% and 100% of designated unit performance. The LE model can be configured as an On / Off device and used as a slave in a larger system, or as a proportional control device in stand-alone applications.